
Electrical socket and switch repair in Lees for cracked, loose, scorched or dead sockets and switches. We find out why it failed, replace it safely and check the circuit, with no call-out charge.

Brown or black marks around a socket, a faceplate that feels warm, a crackling or buzzing sound, or a plug that falls out easily are all signs of a problem. A light switch that sparks when you use it, or a light that flickers when you touch the switch, needs looking at too.
The most common causes are loose connections behind the faceplate, worn contacts from years of use, and overloading with adaptors and heaters. A loose connection heats up every time power flows through it, which is how scorch marks start. Replacing the faceplate alone won't fix that.
If you're replacing a socket anyway, it's a good time to switch to one with USB charging ports, or to change old switches to a style that matches your room. We can also add a second socket nearby if you're relying on extension leads.
When you call, we ask what you've noticed and whether anything else on the circuit has stopped working. If there are scorch marks, we advise you to switch that circuit off at the consumer unit until we arrive. There's no call-out charge for the visit.
On site, we isolate the circuit, remove the faulty socket or switch and check the cable ends and back box for damage. We cut back any burnt cable, fit the new accessory, then test the circuit to make sure nothing else is affected. You get a certificate for the repair.
Tell us what's wrong or what you need doing. For urgent faults we offer a same day response.
There's no call-out charge. We look at the job and give you a free quote before any work begins.
We finish the work, test it and leave you with the right certificate for the job.
Yes, it should be treated as urgent. Scorch marks mean the socket or its wiring has been getting hot, which can lead to a fire. Stop using it, unplug anything connected if it's safe to touch, switch off that circuit at the consumer unit and have it checked.
Replacing a like-for-like socket isn't notifiable work, but it does mean working on the wiring, and the cause of the damage is often behind the faceplate. If there are scorch marks, buzzing or a loose fit, it's safer to have an electrician check the connections and the circuit.
Usually because a breaker or RCD has tripped, or because a connection has failed at one socket and broken the circuit for the others. Check your consumer unit first. If nothing has tripped, or it trips again, there's a fault on the circuit that needs tracing.
Yes. USB sockets fit the same back boxes as standard ones in most homes, so swapping is usually straightforward. We check the existing connections and box while we're there, so you get the new socket and peace of mind that the wiring behind it is sound.
We repair and replace sockets and switches in Lees and the surrounding area. Choose your town.
Tell us which socket or switch is playing up and what you've noticed, and we'll come and put it right.